Dry wall repair is the process of repairing holes, cracks, or dents in drywall. It is often done by professionals. However, it is also a DIY project. If you don’t have the skill, knowledge, or tools to do it on your own, you may want to hire a professional.
Most drywall repair is done by patching or replacing the drywall. This can be a cheaper alternative than tearing down the wall entirely. The repair usually includes sanding, joint compound, and a new coat of paint.
First, you need to determine the studs in the wall. You can use a carpenter’s square to mark the areas. Next, you need to cut a piece of drywall big enough to cover the damaged area.
Once you have cut the section, you need to apply a layer of joint compound. These can be purchased at home improvement stores. For a more inexpensive option, you can make your own joint compound. Using a mixer with a bucket is a more convenient way to do this.
After the compound is dry, you should sand the area lightly. This will smooth out the texture. Make sure to wear a dust mask while sanding. Sanding dust can easily make patching hard.
After the compound has dried, you can cut the drywall tape. To do this, you will need a straight blade screwdriver. Cut the tape from the middle toward the ends. Try to leave no wrinkles or bulges in the tape.